Embroidery file leaves minis approx. 4.5 x 4.5 cm for 10x10 frames of 4

You leaves do you want to dance?

That's how the wind calls in autumn... I remember the song from my school days. Do you know that too?

Take a look at the great work of our design stickers.

Even if we don't have one for every file, here's a word about the "border" . I prefer light borders with the character of a drawing or painting, not complete framing. It is therefore possible that the border does not fit 100% on the image. This is intentional.

Embroidery file for the embroidery machine in the formats

*DST *EXP *JEF *PES *VP3 *XXX *HUS

If you don't find your format here, please contact us. A revocation is excluded after receipt of the embroidery files. With the file you only acquire a right to use the motif. The embroidery files are the sole property of Jana Leske - stiXXie by lajana - embroidery files with a heart. These files may not be changed, exchanged, sold or passed on.

Terms of use Embroidery files stixxie by lajana – embroidery files with a heart

With full payment of the purchase price you will receive the simple, non-transferable,
temporally and spatially unlimited right to use the acquired embroidery design file(s) in
use private space.

commercial area

If you would like to use the files commercially, this is limited to a maximum of 20 pieces per
Embroidery motif permitted. When using it in the commercial sector, it should be noted that the
Embroidery pattern files exclusively in the original, i.e. digitally unchanged on any
Carrier materials (e.g. clothing, bags, pillows, other textiles, etc.) are used and
can then be sold as end products.

The note "Embroidery motif: stiXXie by Lajana" is in the
add product description.

If you would like to use the purchased embroidery file commercially beyond the 20 pieces,

you can use the shop to obtain a commercial license extension for the respective motif (series)
acquire.
Please inform yourself here in the respective product description about which design series
a product belongs to and indicate this series when purchasing a commercial license extension,
so that we can assign the license extension.

Besides that

It is expressly forbidden, both in the private and in the commercial sector,
Sell ​​embroidery pattern files and/or finished embroidered patterns individually, exchange
to make copies for third parties or to reproduce them in any other way.
The creation and/or sale of buttons and patches is possible with up to 20 pieces per
Motive allowed. In addition, the license extension applies as already described.
In principle, freebies may not be used commercially.

IMPORTANT

The embroidery files we offer have been successfully used on various machines with different file formats and also on
different fabrics embroidered and sufficiently tested.
Still, it's recommended to do a test stick before putting on any garments
embroider

If you do not get a satisfactory result, please contact your
embroidery machine dealer to solve the problem together.
We assume no responsibility for incorrect working practices.

Notes/ Recommendations

TYPES OF FABRIC/DELAY

Please note that the pattern may be slightly distorted with stretchy fabrics
can. Here a firm clamping and a washable Avalon fleece, the
is superimposed, help. Also, I always staple beforehand.

Warping is more likely on heavy fabrics such as sweat than on thin ones
cotton fabrics. Therefore, the needle, thread tension, fleece and fabric should match
be matched.

YARN

I work with Amann Mettler Poly-Sheen. However, it's not the cheapest. Also it is
not suitable for every machine.
In any case, it is advisable to use polyester thread (e.g. from Gunold), because
this is boil-proof and bleach-proof.
It is important to use the right fleece. Also pay attention to your recommendations
machine manufacturer.

COLORS

The colors of the files are chosen at random and can be adjusted or changed at any time.
to be changed.
The software assigns a number to each color, which in some formats
agree, with others not. So it may be that for me the No. 1
is black while in DST format it is red. We have no influence on that.

NON-WOVEN

I like to use tear-away fleece underneath or the washable fleece. There are ao
this:

Madeira Superweb

• Cutting fleece
• Good for sizes up to 13x18
• Soft
• Suitable especially for toddlers/children
• For elastic fabrics such as jersey, sweat, etc.

Madeira Superstrong

• Cutting fleece
• Suitable for all materials
• Recommended for embroideries with very many and dense motifs

Avalon foil

• Necessary for fleece fabrics such as velor or jersey
• It is also generally recommended to protect fabrics when embroidering
• Is applied on top and is water-soluble
• Comes in thin and thick versions
• Thinner Avalon can also be torn out after embroidering

batting

• Thickness of 5mm is great for small ITH embroidery
• For larger ones it can also be 1 cm

Explanation of terms/tips:

• Classic embroidery:
all areas are fully embroidered.
• Classic application:
the surfaces are inlaid with fabric. The stick is done in several steps.
• Fringe application:
the surfaces are inlaid with fabric.
Tip: please do NOT cut the fabric too short here.
It is better to trim at the end with a small curved pair of scissors!
• Doodle Application:
the surfaces are inlaid with fabric.
Tip: please do NOT cut the fabric too short here.
it is better to trim at the end with a small curved pair of scissors!

CHECKLIST:

• Did you unzip the files?
• Correct embroidery file format selected?
• Is a suitable stabilizer used?
• Is the stabilizer firmly clamped?
• Have you inserted a new embroidery needle?
• Rewound the lower thread?
• Tried a different embroidery thread/color?
• Switch the embroidery machine off and on again?
• Has the embroidery machine been cleaned?

What to do if the embroidery file is not readable?

On the subject of the embroidery file not readable, embroidery parts left out, I have corrupt files on the net
I did some research and found the following interesting information:
There are machines, for example, from Bernina, Brother, W6 (the names Bernina
Bernette Chicago 7, Brother 750e, W6) which cannot read the files. Often they are
also older machines that are not quite as good with newer software (if the
digitizing is used) are compatible.

Therefore, there are such tips that you should try.

The Bernina obviously doesn't like the file names! There please the file name in
Rename Windows except for the extension .EXP, which is a must. You all have to go there
Remove spaces, underscores, dots, dashes and special characters. (e.g
Owlbig.EXP)
With the Brother 750e, the stick, which is only used for transfer to the machine, may have a max.
have 512MB. Also, he doesn't like it when there are too many files on it. On that please
save a maximum of 8 files with the extension .PES, no entire folders.

Each machine its own thing

Some other Brother machines, W6 but also my Janome MC500e like in the name
no special characters like ä,ü,ö,ß, no dashes, spaces, dots, comma (only
Letters az and digits 0-9) etc. As a result, some things are not embroidered
something is left out or the data from the stick is not saved at all
taken. Again, please change the file name and only 8 characters for the name
use (e.g. Haseei1.DST). In the same way, only save a maximum of 2 files on the stick.

Embroidery machines are divas

Then the size problem, the embroidery file does not fit in the frame and I would like it
smaller, larger and, and, and.
Some files have to be rotated, you've already noticed that. At some
it works on the machine, with some only on the computer with the appropriate software. If you
did not get any software supplied, it is advisable to look for free ones on the net
programs (e.g. My Editor).
ALSO, you should always format the USB sticks on the machine if that
does not work, then on the computer.

Resize the file!

Resizing a file will never be satisfactory because it can only be done on the
original files that are kept by the creator. If the file in your programs or
are enlarged on the machine, everything stretches because the stitch length and
Increasing distances as a percentage, when reducing it is the opposite. There would be
the threads are likely to become tangled or the designs will become too tight.
Nevertheless, sometimes a file can be faulty from the start, I can't do that
exclude.
In this or any other case, you are welcome to contact me at any time. Her
then get a new file.
Email: janaleske@stixxie.de / Jana Leske

General terms and conditions of business:

The embroidery files are the sole property of Jana Leske -stixxie by lajana.
These files may not be changed, exchanged, sold or passed on.
The designs are the sole property of Jana Leske – stixxie by lajana. The files may not be
altered,
exchanged, sold or shared.

However, we are only human and mistakes can happen. Contact us and we will find a solution together.

Please also note our terms and conditions .

Here is another link to https://www.makerist.de/users/stixxie_by_lajana_stickfied_mit_herz